HotShot SC User Manual
Rev 1.2.5 –March 2012
© NAC Image Technology Inc
Jimmy Robinson
45
Figure 1.
If Auto Centering continually fails you should adjust the diameter of the Quadrant
Centering Circle.
As a further check, the software will limit the amount of movement allowed for the
Centre of the target (similar to the search area). If the centre moved more than the
value in
Max Centre Movement
then the software will stop for user confirmation.
6.14.4.3
Tracking Results
Once Auto Tracking is completed you can view the results by making selection in the
RESULTS part of the auto tracking screen.
The measurements will be base on the image CALIBRATION if conducted (see
6.14.1), otherwise they will be based on image Pixels.
