HotShot SC User Manual
Rev 1.2.5 –March 2012
© NAC Image Technology Inc
Jimmy Robinson
55
then Re-ARM the camera ready for a subsequent recording. The Auto Run will
continue until it is interrupted by the user (Press STOP key in ARM Mode) OR there
is no longer sufficient storage space for the download.
NOTE :
AUTO RUN can be
COMBINED
with Auto Segment Increments such that the
Auto Run Download will begin AFTER the last segment has been recorded. In this
case ALL segments can be downloaded (check all segments check box) one after
the other.
Use this …
To do this…
Save Path
Specify the Path to save the files to
Save Start
Specify the Start Frame to save from
Save End
Specify the End Frame to Save To
Save
Filename
Specify the Save File name
All
Segments
Specify that ALL segments should be downloaded
Activate
Switch ON / OFF Auto Run Process (see
also 6.15.2)
6.16.7.1
Auto Run Filenames
The filename use to store auto run downloads will start wit the value specified in the
autorun Setup Display above. If Multiple Segments (see section 6.12) are used then
the filename will be appended with “[Sx]” where x indicates the segment number.
Finally the filename will be numbered starting from 0000.
For example if JUN17Ar is specified as the filename (as above) then the output files
will be called :
JUN17Ar[S1]0000.HSF
JUN17Ar[S2]0000.HSF
JUN17Ar[S3]0000.HSF
JUN17Ar[S4]0000.HSF
JUN17Ar[S1]0001.HSF
JUN17Ar[S2]0001.HSF
JUN17Ar[S3]0001.HSF
JUN17Ar[S4]0001.HSF
Assuming that there are FOUR segments specified in segmentation setup (see
section 6.12)
