HotShot SC User Manual
Rev 1.2.5 –March 2012
© NAC Image Technology Inc
Jimmy Robinson
33
The Scroll bar indicates the frames available on the camera or in the file. The mark
IN
and
OUT
frames are shown by the triangles as indicated above. These triangles
CAN be dragged to adjust the mark
IN
and
Out
Frames. The current frame is
indicated by the Slider. This can be dragged to change the current frame.
The Trigger frame is indicated by the RED mark.
6.8 Synchronization Modes
Synchonisation Mode of the connected camera/s is initially determined by the Default
Sync Modes as defined in the Software Preferences. (See 6.16.1).
6.8.1 Sync In
The Sync In mode of the camera determines how the signal input to the Sync In BNC
Connector (see 1.2.3) is interpreted. The Sync In mode is also displayed in the
“MODE” column of the Item List.
The Sync mode settings are different for each camera series so the menus might be
slightly different to what appears here.
There are FOUR possible States for the Sync In.
•
MASTER (Internal Timing) “M”
•
SLAVE Rising Edge “SR”
•
SLAVE Falling Edge “SF”
•
Internal (with Hardware Arm) “MA”
To change the Sync In Mode of a specific camera you should select the camera in
the item list and RIGHT CLICK to show a pop up menu.
Use this …
To do this…
MASTER (Internal Timing)
Ignore the Sync In Signal and use an internal
