User Manual
120
Select
LAN Set
in the left menu. In the bottom menu, set the
Type
item
as
WIFI-STA
, and select
Set
in the bottom menu.
(2)
In the right menu, select
SSID
, a keyboard will pop up. Input the name of the Wi-Fi
hotspot. You can turn and push the
M
rotary control, or touch the keyboard (if the
LCD is touchscreen).
(3)
In the right menu, select
Encryption
, push to set the Encryption type of the Wi-Fi
hotspot.
Open
type needs no password.
WEP
or
WPA
type need to input the
password. In the right menu, select
Password
, use the keyboard to input the Wi-Fi
hotspot password.
(4)
In the right menu, select
IP:PORT
, Turn the
M
rotary control to set the
PORT
. Here,
we set it to 3000.
(5)
After setting, select
ON
in the
Status
menu. The value of
IP
is displayed in
IP:PORT
menu. Here IP is 10.1.1.126. A changing icon
appears on the top right of the
screen.
(6)
Select
Save set
in the bottom menu to save current settings.
(7)
Set the network parameters of the computer
. Set IP in the computer, the first three
bytes is same as the IP in the oscilloscope, the last byte should be different. Here, we
set it to 10.1.1.123. The Default gateway and Subnet mask should be set according to
the router.
Summary of Contents for MP720021
