User Manual
113
10.
When internal storage is selected
: You can export the internal record file to a USB
memory device. Insert the USB memory device into the front-panel USB port on your
instrument. Select
Export
in the bottom menu. The instructions will be shown on the
screen. The export file will be named as "Multimeter_Recorder.csv". If a file with the
same name already exists in the USB memory device, it will be overwritten. (If you
want to keep the existing file, back up it to other location in advance.) Select
Export
in
the bottom menu to export.
How to chart the data
You can open the CSV file using Microsoft Excel, or your favorite spreadsheet application,
and create charts based on the data.
In the following steps, Microsoft Excel 2010 is used as an example.
1.
Open Multimeter_Recorder.csv in Excel.
Interval
Measurement mode
Reference value of the
relative measurements
2.
Select the data that you want to chart (see
3.
On the
Insert
tab, in the
Charts
group, click
Line
, and then click
Line
in 2-D Line
4.
The chart will be displayed (see
). If you want to keep the chart, save the file
to XLS format.
Figure 6-6
Figure 6-4
Figure 6-5
Summary of Contents for MP720021
