Our engineering and marketing folks here at Multi-Link have designed a feature-rich product
that can perform a very simple function, control power to your equipment, a number of
different ways. It is our intent, with this manual, to supply you with all the operational
information needed to realize the full potential of The Power Stone. While our focus is to get
you “up and running” as quick as
possible, it is difficult to anticipate
what specific information you will
need to do this. Here’s what we
suggest:
First, look through the table of
contents to become familiar with the
manual layout and what features you
think would apply for your
application. Definitely read the
sections titled
“How The Power Stone
Works (An Overview!)”
and
“Down
N’ Dirty Application Info For The
Terminally Impatient”
. These sections
are pretty good for developing a basic
concept for yoúr specific application.
We also recommend turning to page
14 -
and viewing the
“Programming
and Quick Reference Guide”
to
familiarize yourself with the
programming of features.
If your power control needs are pretty
simple and you require The Power
Stone to operate in one mode all the
time, then the job is simple. Just read
the “Programming and Quick
Reference Guide" the
“Manual
Operation /Programming Of The
Power Stone"
section and go for it!
Install The Power
S tone, program
pertinent features and operating
mode (according to the manual
directions and your application
requirements).......and it’s a done deal.
If your power control needs are of a more complex variety and you want to master The Power
Stone’s ful1 potential as a remote power control and feature “readback” device we suggest
you do this...... read the manual thoroughly, hook-up The Power Stone to a phone line and
120 Volt wall socket, plug in your selected device, connect a phone to the "DEVICE" port
and plav with it. "Hands-on" training is the best way to sharpen your operating skills, instill
confidence in The Power Stone’s abilities and overcome any “technophobia” you may have.
