muli Muskel User Manual Download | Manualshive

Page: 26 / 59

background image

50

51

Handlebar and stem

Handlebars, stem and stem adapter must be bolted according to the torques indica-

ted on the components. The corresponding torques can also be found listed in the

section „Recommended screw torques“.
The muli has a height-adjustable stem adapter.

This adapter allows the stem and handlebars to be

adjusted in height by 10 cm. This allows the handle-

bar height to be adjusted to different riders but also

load conditions in the load basket. Especially when

transporting children in the muli child seat, this height

adjustment allows the children more headroom when

the child seat is mounted in the direction of travel.

Make sure that the quick-release lever of the stem adapter

is always firmly closed while riding and that the handlebars

do not move in height.

Turning in the handlebar for transport and parking

In addition to height adjustment, the stem adapter

also allows the handlebars to be turned in sideways,

making the muli even more compact for parking - in a

hallway, for example. To turn in the handlebars, open

the quick-release on the stem adapter, pull the hand-

lebars up as far as they will go and turn them in side-

ways in this highest position.

Hereupon you can guide the turned handlebar back

down and lock it by quick release. To then turn the

handlebar back to the normal riding position, guide

the handlebar back to the highest position and turn

it out. Note that the handlebars can only be turned in

and back out in the top position!

back again!

«
...
24
25
26
27
28
...
»

Summary of Contents for Muskel




























































Reviews:

No comments

Related manuals for Muskel

Brand: SmartTrike Pages: 32

Brand: oh!bike Pages: 20

Brand: Babboe Pages: 91

Brand: Air Bike Pages: 8

Brand: ibis Pages: 36

Brand: Uebler Pages: 68

Brand: Bulls Pages: 113

Brand: The Hive Pages: 2

Intuvia PowerPack 300

Brand: Bosch Pages: 23

Brand: Bosch Pages: 14

Brand: Bosch Pages: 45

Brand: Bosch Pages: 162

KALKHOFF PERFORMANCE

Brand: Bosch Pages: 103

Brand: Rose electronics Pages: 2

Brand: Daymak Pages: 6

LOGO Expedition

Brand: tubus Pages: 2

Brand: Littium Pages: 24

Brand: FLOATERHOIST Pages: 16

Brands by name

0 1 2 3 4 5 6 7 8 9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z

Popular brands

Load more brands