muli Muskel Page 49 User Manual Download

Page: 49 / 59

The position of the handlebars

can now be changed again.

Important: The handlebar must be

extended by at least 5 cm (observe

marking).

Please always stow the straps on the ceiling inside the

rain canopy (fastening of the side walls) well. If the straps

are hanging down, there is a risk that the children will pull

on them and the pressure may bend the carrier linkage.

Folding Guide

Please read these folding instructions carefully and memorize the folding steps.

It is essential to fold the canopy according to these instructions, otherwise the

transparent windows may be damaged by incorrect folding and get cracks and

holes.

Lay the canopy on a flat surface. In a first step, lay it together as shown in this

photo. Pay close attention to the fact that the window material on the sides is

not up to the edge, but the black textile fabric ends at the edge. Otherwise, at

this point the window material would be bent too often in the following.

Then fold in the side tips

Rain Cover

Summary of Contents for Muskel




























































Search results

Summary of Contents for Muskel

Reviews:

Related manuals for Muskel

Brands by name

Popular brands

muli Muskel, User Manual

Search results

Summary of Contents for Muskel

Reviews:

Related manuals for Muskel

Brands by name

Popular brands