muli Muskel, User Manual, Page: 36 / 59

70
71
Lighting System
A functioning light system is mandatory for participation in public road traffic. The
muli has either two battery-powered lights or two dynamo lights from Busch&Müller.
Furthermore, it has a red rear light with integrated Z-reflector, a white front light with
integrated reflector, two yellow reflectors per pedal and ring reflectors on the sides
of the tires. Thus, the lighting system is StVZO compliant.
The battery light can be charged using a standard USB cell phone charging cable
and does not require a special charger.
Make sure that the accumulators or batteries of both lights are always charged/full
when you ride your muli. It is best to switch on the light at the onset of dusk - this will
make you more visible to other road users and prevent accidents.
Make sure that the rear light is always
clearly visible.
The front light is fixed, but it can be tilted up
and down, which allows you to adjust the angle
of light. For optimum visibility, adjust the light so
that the light cone hits the ground in the range
5-8 meters in front of the front wheel.
Adjustment screw
Make sure that all screws on the lamp are well fixed and that it does not adjust
while driving.
Keep in mind that the bulbs in the lamps wear out and must be replaced when
they fail to function.
Never ride without a functioning light system. Especially
driving in the dark with a non-functioning light system is
life-threatening.
Make sure your lighting system is clean and all reflec-
tors are clearly visible.