muli Muskel, User Manual

Page: 42 / 59

82
83
Child seat and child transport in the muli
The muli child seat is made of high strength waterproof textile with reinforced and
padded backrest and two aluminum rods to hang the seat in the load basket.
The load basket has two opposing mounts
at the front and rear for the child seat and
rain cover. A locking bolt with spring ba-
lancer is located on each of the mounts.
The end pieces of the seat bars are inser-
ted into these holders.
The seat offers space for two children
and may be loaded with a maximum of
40kg. A child may be transported in the
child seat up to a maximum weight of
22kg and a height of 120cm.
Never use the seat for children who are not yet able to sit independently.
can.
The child seat has two 3-point safety belts, which can be adjusted in length and
height. The child seat buckles snap magnetically into the holder. Due to the han-
ging system and the textile material, the seat also absorbs light road shocks and
the children sit very comfortably. Nevertheless, when driving with children, avoid
driving over steep bumps, such as curbs, to keep the impact on the children as low
as possible. Thanks to the high backrest, the seat also offers children protection in
the neck and head area. In addition, the seat can be installed both in and against the
direction of travel. Before each ride, check the seam, rivet, plug-in, belt and screw
connections for strength and integrity.