manualshive.com logo in svg

muli Muskel, User Manual, Page: 16 / 59

Share
Download
muli Muskel User Manual Download Page 16

30

31

Then tighten the preload nut until counterpressure is felt at the quick-release 

lever from the middle of the entire lever travel and the force of the ball of the 

hand is required at the end of the lever travel to close the lever completely. It 

must not be possible to twist or tilt the saddle when the saddle clamp is closed. 

Align the saddle so that it is in line with the top tube.

The foot is optimally positioned 

on the pedal when the ball of the 

foot is above the pedal axle.

Make sure that you can still reach 

the ground with the tips of your 

feet when sitting on the saddle.

The maximum load on the saddle is 100kg. This includes a 

backpack and other weights on the rider‘s body. 

Consider all weights that you load in addition to their own 

weight on the seat tube. The load limit of 100kg must not 

be exceeded!

The quick-release must be firmly closed and fit tightly 

against the seat post before you start riding. The tip of the 

lever must point forward when closed ( see also illustration 

on page 29 below).

Adjusting the handlebar height

The muli has a height-adjustable stem adapter, 

through which the handlebar height can be ad-

justed in height by up to 10cm with a few simple 

steps. Open the quick release lever on the hand-

lebar stem and pull the handlebars up as far as 

you need and then close the quick release again.

Make sure you never adjust the stem adapter so that it is 

pulled past the min/max mark and the quick release lever is 

firmly closed.

Adapting the muli to the rider

Summary of Contents for Muskel




























































Reviews:

No comments