muli Muskel User Manual Download Page 18 | Manualshive

Page: 18 / 59

muli Muskel User Manual Download Page 18

34

35

Adjusting the brake lever grip width

The distance between the handlebar

grip and brake lever can be adjusted. To

reduce the grip width, turn the hexagon

socket screw on the brake lever coun-

terclockwise. To increase the grip width,

turn the screw clockwise.

Note that adjusting the grip width may

require an adjustment of the brake pad

spacing. For more information, see the

„Brake system“ section.

It must not be possible to pull the brake lever through to

the handlebar. The brake must engage clearly before this.

Observe the torque specifications for handlebar, stem and

stem adapter

Setting the lights

The rear light is fixed to a rigid bracket and does not need to be adjusted. The

front light, on the other hand, can still be tilted up and down on its bracket. Ad-

just the light so that the light cone hits the ground in the range 5-8 meters in front

of the front wheel.

Make sure that the lamp is never tilted so that it shines

upwards. This could blind oncoming road users. Falls and

serious accidents can be the result.

Adapting the muli to the rider

«
...
16
17
18
19
20
...
»

Summary of Contents for Muskel




























































Reviews:

No comments