muli Muskel User Manual Download | Manualshive

Page: 29 / 59

background image

56

57

Brake System

The muli has hydraulic disc brakes on the front and rear wheel.

The left brake lever operates the front wheel brake.

The right brake lever operates the rear brake.

If you are not familiar with this brake lever assignment or have previously ridden

bikes with coaster brakes, you must carefully get used to the braking system and the

braking behavior of the muli.

Note that the installed hydraulic disc brakes have a very high braking effect - dose

the braking force carefully. Always apply both brakes at the same time. Especially

the use of the front brake alone is to be avoided on the muli due to the wide distan-

ce between handlebar and front wheel. On rough, sandy, uneven, very slippery, wet

surfaces and when cornering, applying the front brake alone can very easily cause

the front wheel to slip and lead to serious falls.

Keep in mind that the braking distance and braking behavior change depending on

the load conditions and the slope of the road. Braking distance increases when ri-

ding at high speeds and on sloping roads.

Check the screws on the brake caliper and the brake pads once a month. The brake

pads are wearing parts. Replace the brake pads when they are less than 1mm thick.

Check the brake system regularly for leaks.

For more information on the installed Shimano hydraulic disc brakes,

see the manufacturer‘s instructions on the web at:

https://si.shimano.com/pdfs/um/UM-8VR0A-003-01-GER.pdf

When replacing the brake pads or other parts of the brake sys-

tem, use only original spare parts from the component manu-

facturer!

Never apply the front brake alone when cornering or when the

steering angle is low. Such braking behavior can very quickly

cause the front wheel to slip and thus lead to serious falls.

Note that the installed, hydraulic disc brakes have a very high

braking effect - dose the braking force carefully.

Please note that the grip of the tires is reduced in wet conditi-

ons and the braking distances increase accordingly. Brake ear-

lier on wet roads. Drive with foresight.

«
...
27
28
29
30
31
...
»

Summary of Contents for Muskel




























































Reviews:

No comments

Related manuals for Muskel

Brand: Wattson Pages: 19

Brand: Darfon Pages: 65

INspider ALDHU24

Brand: ROTOR Pages: 64

Brand: Kayoba Pages: 60

Brand: Monster Moto Pages: 17

Brand: Giant Pages: 1

Evolution Smart

Brand: NiteRider Pages: 16

Brand: PRESTIGE Fietsen Pages: 12

Brand: Eleglide Pages: 88

KID TRAX 04KT1244

Brand: PACIFIC CYCLE Pages: 23

Brand: DOM FAMILY Pages: 2

Brand: Hudora Pages: 15

Brand: FiSHAW Pages: 18

Brand: King-Meter Pages: 16

Brand: King-Meter Pages: 31

Brand: Vetta Pages: 5

C-06 CYCLE COMPUTER

Brand: Vetta Pages: 9

Brand: Vetta Pages: 13

Brands by name

0 1 2 3 4 5 6 7 8 9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z

Popular brands

Load more brands