Checking diaphragm
1.
Remove cover (4).
2.
Take off spring (5), seal (2) and diaphragm
(3).
3.
Check diaphragm (3) for damage.
4.
Fit new diaphragm if used one is damaged.
5.
Mount diaphragm (3) on housing (1).
6.
Install new seal (2) and spring (5) together
with cover (4).
7.
Tighten screws of cover (4) to specified tightening torque.
Name
Size
Type
Lubricant
Value/Standard
Screw
Tightening torque
6 Nm + 2 Nm
8.
Check diaphragms in further oil separators in the same way.
72 | Task Description | M015700/06E 2012-06
TIM-ID: 0000003491 - 004
