Abbrevia‐
tion
Meaning
Explanation
IDM
Interface Data Module
IMO
International Maritime Organization
ISO
International Organization for Stand‐
ardization
International umbrella organization for all national
standardization institutes
KGS
Kraftgegenseite
Engine free end in accordance with DIN ISO 1204
KS
Kraftseite
Engine driving end in accordance with DIN ISO
1204
LCD
Liquid Crystal Display, Liquid Crystal
Device
LCU
Local Control Unit
LOP subassembly
LED
Light Emitting Diode
LMU
Local Monitoring Unit
LOP subassembly
LO
Low
Alarm: Measured value lower than 1st minimum
limit value
LOLO
Low Low
Alarm: Measured value lower than 2nd minimum
limit value
LOP
Local Operating Panel
Control console, control panel
LOS
Local Operating Station
MCS
Monitoring and Control System
MG
Message
MPU
Microprocessor Unit, Microprocessing
Unit
MRG
Main Reduction Gear
OT
Oberer Totpunkt
Top Dead Center (TDC)
P-xyz
Pressure-xyz
Pressure measuring point xyz
PAN
Panel
Control panel
PCU
Propeller Control Unit
PIM
Peripheral Interface Module
PT
Power Turbine
RCS
Remote Control System
RL
Redundancy Lost
Alarm: Redundant CAN bus missing
SAE
Society of Automotive Engineers
U.S. standardization organization
SAT
Sea Acceptance Test
SD
Sensor Defect
Alarm: Sensor failure
SDAF
Shut Down Air Flaps
Emergency-air shutoff flap(s)
SOLAS
International Convention for the Safe‐
ty of Life at Sea
SS
Safety System
Safety system alarm
SSK
Schnellschlussklappe(n)
Emergency air shut-off flaps
SSS
Synchronized Self-Shifting (clutch)
STBD
Starboard
T-xyz
Temperature-xyz
Temperature measuring point xyz
M015700/06E 2012-06 | Appendix A | 131
TIM-ID: 0000002049 - 005
