551 – SS Engine Overspeed Camshaft
ZKP-Number: 2.2510.933
Red alarm; engine stop
Cause
Corrective action
Engine overspeed - camshaft
1. Acknowledge alarm.
2. Restart engine (→ Page 29).
3. Request towing locomotive if required.
558 – AL Wiring PWM_CM2
ZKP-Number: 1.1041.922
Yellow alarm; warning
Cause
Corrective action
Wire break or short circuit on
channel PWM_CM2.
u
Check wiring to connected device or check connected device
(actuator/sensor), replace if necessary.
593 – AL T-Lube Oil Pan Low (Option)
ZKP-Number: 2.1090.929
Yellow alarm; warning
Cause
Corrective action
T-Lube Oil Pan has violated the
limit value (too cold);
significantly increased engine
wear. Engine start might be
inhibited by the locomotive
control system.
1. Extend preheating period.
2. Request towing locomotive if required.
3. Move locomotive into heated hall if necessary.
594 – AL L1 UDV Defekt Rail 1
ZKP-Number: 1.1301.900
Yellow alarm; warning
Cause
Corrective action
Pressure relief valve of first rail
faulty.
u
Check pressure relief valve, replace as necessary.
595 – AL L2 UDV Defekt Rail 1
ZKP-Number: 1.1301.901
No alarm, fault is entered
Cause
Corrective action
Pressure relief valve of first rail
faulty.
u
Check pressure relief valve, replace as necessary.
MS15033/02E 2015-02
| Troubleshooting | 69
TIM-ID: 0000047144 - 003
