3.
Engage barring device (1) in ring gear and
install on flywheel housing (2).
4.
Fit adapter and ratchet adapter on barring
device.
5.
Rotate crankshaft in engine direction of ro-
tation. Apart from the normal compression
resistance, there should be no resistance.
6.
For barring device removal, follow reverse
sequence of working steps.
Barring engine manually – Var-
iant B
Note:
Remove starter if necessary.
1.
Remove screw (2) on flywheel housing.
2.
Remove end cover (1).
3.
Engage barring device (2) in ring gear and
install on flywheel housing (1).
4.
Fit adapter and ratchet adapter on barring
device.
5.
Rotate crankshaft in engine direction of ro-
tation. Apart from the normal compression
resistance, there should be no resistance.
6.
For barring device removal, follow reverse
sequence of working steps.
MS15033/02E 2015-02
| Operation | 35
TIM-ID: 0000045482 - 003
