MTS Systems TFIR-31LAN series, Operation Manual

Page: 75 / 104

- 73 -
Term Command Description
ITF SET=IM0 Disable ITF
SET=IM1
Enable ITF, Disable C/D check
(*)
SET=IM2 Enable ITF, Enable C/D check, Enable C/D transmission
SET=IM3 Enable ITF, Enable C/D check, Disable C/D transmission
DIGIT=Ib,c Set minimum (b) and maximum (c) digit numbers of ITF
EDIT=Ib,c Output ITF data within a range of b-digits to c-digits
SYMHEAD=Ia Set header character of ITF
=Ia,¥bb a=0; Disable
(*)
a=1; Enable
=Ia,c bb; Hexadecimal code c; Character
=Ia,[dd] dd; ASCII code (¥00 to ¥1F)
When omitting “bb”, “c” and “dd”, those settings will be remained.
SYMFOOT=Ia Set footer character of ITF
=Ia,¥bb a=0; Disable
(*)
a=1; Enable
=Ia,c bb; Hexadecimal code c; Character
=Ia,[dd] dd; ASCII code (¥00 to ¥1F)
When omitting “bb”, “c” and “dd”, those settings will be remained.
Code93 SET=GM0 Disable Code93
SET=GM1 Enable Code93
(*)
DIGIT=Gb,c Set minimum (b) and maximum (c) digit numbers of Code93
EDIT=Gb,c Output Code93 data within a range of b-digits to c-digits
SYMHEAD=Ga Set header character of Code93
=Ga,¥bb a=0; Disable
(*)
a=1; Enable
=Ga,c bb; Hexadecimal code c; Character
=Ga,[dd] dd; ASCII code (¥00 to ¥1F)
When omitting “bb”, “c” and “dd”, those settings will be remained.
SYMFOOT=Ga Set footer character of Code93
=Ga,¥bb a=0; Disable
(*)
a=1; Enable
=Ga,c bb; Hexadecimal code c; Character
=Ga,[dd] dd; ASCII code (¥00 to ¥1F)
When omitting “bb”, “c” and “dd”, those settings will be remained.
UPC/EAN/JAN SET=EM0 Disable UPC/EAN/JAN
SET=EM1 Enable UPC/EAN/JAN
(*)
JE13SUM=0 Transmit JAN/EAN (standard) data with Checksum
(*)
JE13SUM=1 Transmit JAN/EAN (standard) data without Checksum
JE8SUM=0 Transmit JAN/EAN (short) data with Checksum
(*)
JE8SUM=1 Transmit JAN/EAN (short) data without Checksum
UASUM=0 Transmit UPC-A data with Checksum
(*)
UASUM=1 Transmit UPC-A data without Checksum
UESUM=0
Transmit UPC-E data with Checksum
(*)
UESUM=1 Transmit UPC-E data without Checksum
UPCANS=0 Transmit UPC-A data with Number system
(*)
UPCANS=1 Transmit UPC-A data without Number system
UPCENS=0 Transmit UPC-E data with Number system
(*)
UPCENS=1 Transmit UPC-E data without Number system
UPCE=0 Transmit UPC-E data in
UPC-A
format
(*)
UPCE=1 Transmit UPC-E data in
UPC-E
format
UPCTX=0 Add “0” at the beginning of UPC-A formatted data
(*)
UPCTX=1 Not added “0” to UPC-A formatted data