MTS Systems TFIR-31LAN series, Operation Manual

Page: 72 / 104

- 70 -
Default:
(*)
7.1 Communication
Term Command Description
Baud rate BAUD=aaaa [1200bps] aaaa=1200 [2400bps] aaaa=2400
[4800bps] aaaa=4800 [9600bps
(*)
] aaaa=9600
[19200bps] aaaa=19200 [38400bps] aaaa=38400
[57600bps] aaaa=57600 [115200bps] aaaa=115200
Frame FRAME=0 7 bits, Odd, Stop bit 1
FRAME=1 7 bits, Odd, Stop bit 2
FRAME=2 7 bits, Even, Stop bit 1
FRAME=3 7 bits, Even, Stop bit 2
FRAME=4 8 bits, None, Stop bit 1
(*)
FRAME=5 8 bits, None, Stop bit 2
FRAME=6 8 bits, Odd, Stop bit 1
FRAME=7 8 bits, Odd, Stop bit 2
FRAME=8 8 bits, Even, Stop bit 1
FRAME=9 8 bits, Even, Stop bit 2
Header HEAD=a Header character
a=0; None
(*)
a=1; [SX] a=2; [EC]
Terminator TERM=a Terminator character
a=0; None a=1; [EX] a=2; [EX][CR]
a=3; [CR][LF]
(*)
a=4; [CR] a=5; [CR][TAB]
a=6; [TAB][CR]
Command CMDFORM=0 [CR] or [CR][LF]
(*)
Format CMDFORM=1 [[Terminator]
Separator SEPA=a Character code
a=0; None a=1; &
a=2; , (Comma)
(*)
a=3; [FS] (1C hex)
a=4; [GS] (1D hex) a=5; [SP] (20 hex)
Prefix PREFIX=a Prefix character
=a,¥bb a=0; Disable
(*)
a=1; Enable
=a,c bb; Hexadecimal code c; Character
=a,[dd] dd; ASCII code (¥00 to ¥1F)
When omitting “bb”, “c” and “dd”, those settings will be remained.
Suffix SUFFIX=a Suffix character
=a,¥bb a=0; Disable
(*)
a=1; Enable
=a,c bb; Hexadecimal code c; Character
=a,[dd] dd; ASCII code (¥00 to ¥1F)
When omitting “bb”, “c” and “dd”, those settings will be remained.
RS/CS control RSCS=0 Disable RTS/CTS flow control
(*)
RSCS=1 Enable RTS/CTS flow control
TCPCS=0 Disable data arrival confirmation
(*)
TCP/IP arrival
confirmation
TCPCS=1 Enable data arrival confirmation
COMFROM=0 RS232C only
(*)
COMFROM=1 LAN only
COM Port
（ Sync command,
Data output ）
COMFROM=2 RS232C and LAN
Control Code LABELTX=0 Pass through
(*)
LABELTX=1 Change Control code to ASCII code within [hex].