MTS Systems TFIR-31LAN series, Operation Manual

Page: 80 / 104

- 78 -
Term Command Description
Aztec Code SET=zM0 Disable Aztec Code
SET=zM1 Enable only for normal Aztec Code
SET=zM2 Enable only for inverse Aztec Code
SET=zM3 Enable Aztec Code (normal/inverse)
(*)
DIGIT=zb,c Set minimum (b) and maximum (c) digit numbers of Aztec Code
EDIT=zb,c Output Aztec Code data within a range of b-digits to c-digits
SYMHEAD Set header character of Aztec Code
=za,¥bb a=0; Disable
(*)
a=1; Enable
=za,c bb; Hexadecimal code c; Character
=za,[dd] dd; ASCII code (¥00 to ¥1F)
When omitting “bb”, “c” and “dd”, those settings will be remained.
SYMFOOT Set footer character of Aztec Code
=za,¥bb a=0; Disable
(*)
a=1; Enable
=za,c bb; Hexadecimal code c; Character
=za,[dd] dd; ASCII code (¥00 to ¥1F)
When omitting “bb”, “c” and “dd”, those settings will be remained.
Multi-Labels LABELS=a Number of labels a=1 to 4
；
a=1
(*)
OUTFORM=0 Output in the order of decoding
(*)
OUTFORM=1 Output in the order of the specified digit-number
OUTFORM=2 Output in the order of the specified characters
OUTFORM=3 Output in the order of the specified symbologies
SET=$Na-b Set label number and verification digit number
a=1 to 4; Label number
b=0 to 2047; Digit number
SET=$Ca-bbc
c Set label number and verification character
a=1 to 4; Label number
bb; The first character in Hexadecimal
cc; The second character inHexadecimal
SET=$Sa-b Set label number and verification symbologies
a=1 to 4; Label number
b; Symbol identifier