MTS Systems TFIR-31LAN series, Operation Manual

Page: 87 / 104

- 85 -
7.9 Preset Mode
Term Command Description
Preset ?pre Get the status of Preset Mode settings
PREM=0 Disable Preset Mode
(*)
PREM=1
Enable Preset Mode 1
Preset data is the first decoded one after power up
PREM=2
Enable Preset Mode 2
Preset data is registered in advance
SET=PRENa
Set the number of digits for comparing
a=0 to 100
a=0; No count
clrpren Initialize number of digits (No count)
SET=PREDa Set the preset data
clrpred Initialize preset data
7.10 Configuration reference
Term Command Description
Status ? Status Transmission (1
st
page)
?? Status Transmission (2
nd
page)
??? Status Transmission (3
rd
page)
?4 Status Transmission (4
th
page)
?5 Status Transmission (5
th
page)
?6 Status Transmission (6
th
page)
?LF Status Transmission (for Autosense mode)
?IMG Status Transmission (for Image ouput and Image save)
?ddmtbl Status Transmission (for Table settings)
7.11 Image output, Image save
Term Command Description
Select type of
image
IMGSEL=a
a=0 to 1
0; Captured image 1; Decoded image
(*)
OKFRAME=a
Good Read;
a=0 ; Decoded image (Not specified)
(*)
a=1 to 4 ; The specified image stored internal memory
NGFRAME=a
No Read;
a=0 ; Decoded image (Not specified)
(*)
a=1 to 4 ; The specified image stored internal memory
Trimming IMODE=a a=0; Disable
(*)
a=1; Enable
PX=aaa The origin of X-coordinate aaa=0 to 751 0
(*)
Trimming
posion
PY=aaa The origin of Y-coordinate aaa=0 to 479 0
(*)
WX=aaa The width of X-coordinate aaa=1 to 752 752
(*)
WY=aaa The width of Y-coordinate aaa=1 to 480 480
(*)
Image save IMGSAVE=a Storage condition a=0 to 3 a=1
(*)
0; Disable 1; No Read 2; Good Read 3; SYNC input
IMGFULL=a Overwrite condition a=0 to 1 a=1
(*)
0; Overwrite all stored images
1; Overwrite the image stored in buffer #4