MS840P
Quick Start Guide
Connect dongle to host
Plug the USB Dongle into a free USB port of a host computer. The
MS840P is now ready to use.
Step 4:
The Unitech MS840P Wireless Scanner
Installation Instructions & Popular Configuration Settings
Scan the barcode on the USB Dongle.
Scan Dongle
Step 3:
SETUP AND INSTALLATION
The following steps will walk you through the installation process.
Plug the power supply cable into the bottom of the MS840P and into
an electrical outlet. Charge for at least 5 hours.
ChargE
Step 2:
Open a word processing program such as Microsoft Word or
Notepad on your host. Now scan the following barcode:
Test & Finish
If the word “Unitech” appears on the screen you have succesfully
installed your scanner. Congratulations!
SETTINGS AND CONFIGURATION
The following section covers the most common
configuration settings for your MS840P scanner.
For additional configuration options please visit
unitechscanners.com/MS840P
and select the
“Download” tab. You will find the User’s Manual and a
variety of other resources.
Scan here to switch back to Trigger Mode. In Trigger Mode, the
MS840P will scan only when the scanner button is pressed.
Trigger Mode
Trigger Mode
Tab Mode
Tab Mode
You may wish to set your scanner to Tab Mode. In this mode, data
will tab over to the next column as you scan instead of jumping to the
next line. Scan the top barcode then the bottom barcode to switch to
Tab Mode from the default Enter Mode.
Flash Mode
Flash Mode
Scan here to switch to Flash Mode from the default Trigger Mode. In
Flash mode, the MS840P will function automatically. It will scan at a
set interval.
Power On
Step 1:
Switch the power button to the on position.
