MSD SECTOR Image 2400 Instrument Manual Download Page 14 | Manualshive

Page: 14 / 56

background image

Important Information

14

CAUTION:

To avoid interference from voltage transients, the computer and instrument should be powered by the same

electrical circuit. This may be accomplished using an uninterruptible power supply (UPS), power strip of proper electrical rating,
or by verifying the power wall outlets. If one of these is not possible, a ground strap should be used to connect the instrument
chassis to the computer chassis. Please contact MSD

Scientific and Technical Support

if you have questions or need

assistance.

2.3

Software Compatibility

The Microsoft Windows

®

Update service can affect the operation of the instrument software. When running, the update application can

turn off the database services upon which the instrument relies, causing errors and stopping instrument operation. Updates should not
be run during instrument use. Run manually or schedule Windows updates when you are sure that the instrument will not be in use.
Occasionally, Windows Update does not restart the database server after it runs. This will cause the instrument software to run
incorrectly. Restarting the computer will restart the database service and restore the instrument to full operation.
The SECTOR Imager system has not been tested for compatibility with all programs. Installation of additional applications, such as
anti-virus and security programs may interfere with function.

2.4

Decontamination Prior to Shipping or Servicing

The SECTOR Imager may have been used to analyze infectious materials or in an environment where infectious materials were
handled. For the protection of future users and service personnel, please follow site safety procedures and the directions of the site
safety officer to disinfect the SECTOR Imager before shipping or service. Please contact MSD

Instrument Service

for details.

WARNING:

Follow site safety procedures and the directions of the site safety officer to determine decontamination

requirements for the SECTOR Imager before shipping or service.

«
...
12
13
14
15
16
...
»

Summary of Contents for SECTOR Image 2400

























































Reviews:

No comments

Related manuals for SECTOR Image 2400

Brand: Yamato Pages: 17

Brand: Yamato Pages: 11

Brand: Accuris Pages: 64

Brand: DCOOK Pages: 40

Brand: T Scale Pages: 7

Brand: Taylor Pages: 2

Brand: miniland Pages: 36

Brand: Duronic Pages: 32

Brand: DAVI & CIA Pages: 26

Brand: Westfalia Pages: 19

Brand: Medisana Pages: 5

Brand: OHAUS Pages: 9

Brand: Orion Pages: 2

Brand: Beurer Pages: 132

Brand: Medisana Pages: 64

Brand: Leicke Pages: 25

Brand: ADE Pages: 21

Brand: ECG Pages: 48

Brands by name

0 1 2 3 4 5 6 7 8 9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z

Popular brands

Load more brands