MSD SECTOR Image 2400, Instrument Manual

Page: 50 / 56

Appendix 50
8.2 Specifications
8.2.1
SECTOR Imager
NOTE: All performance information including standard signal levels, detection limits, dynamic range, and instrument noise
is based on 150
µ L read volumes in 96-well MULTI-ARRAY plates using standard plate read parameters.
Unless noted, specifications apply to all models of the SECTOR Imager 2400/2400A and the SECTOR Imager 6000.
8.2.2
Scientific Performance
Table 8:2 Scientific performance
SECTOR Imager 6000 SECTOR Imager 2400/2400A
Standard Signal Levels
Signals generated by Free TAG, 15,000 [Cat # R94AA]
Signals generated by PQ Low Control [Cat # R92TE-2]
12,000–18,000 counts
25–100 counts
12,000–18,000 counts
25–100 counts
Dynamic Range 10 6 10 6
Electronic Noise
Standard Deviation Dark Noise (depends on plate type)
0–16 counts 0–16 counts
8.2.3
Environmental Specifications
Suggested Operational Temperature Range 20–26 ° C (68–78 ° F)
Suggested Operational Humidity Range 10–80% non-condensing
Storage Temperature Range 5–40 ° C (41–104 ° F)
Storage Humidity Range 5–85% non-condensing
Ambient Light <2000 Lux
8.2.4
Power Requirements
SECTOR Imager 2400/2400A (models 1250/1251)
Voltage 100–240 V~ 50/60 Hz
Current 3.7–2.0 A
SECTOR Imager 6000 (model 1200)
Voltage 100 / 120 / 220 / 240 V~ 50/60 Hz
Current 3.3 / 2.7 / 1.5 / 1.4 A
SECTOR Imager 6000 (model 1201)
Voltage 100–240 V~ 50/60 Hz
Current 3.5A–2.8A @ 100–240 V~
Class I, Installation (Overvoltage) Category II Device