MSD SECTOR Image 2400 Instrument Manual Download Page 29 | Manualshive

Page: 29 / 56

background image

29

Installation

4

A qualified MSD service engineer must install and configure the SECTOR Imager before use. Installation includes setup, connection of
the instrument to its computer system, and verification that the instrument is functioning properly. Only the computer provided with the
instrument and configured by an MSD service engineer should be used to operate the SECTOR Imager.

CAUTION:

Installation of additional software on the computer system used to operate the SECTOR Imager is not supported.

Specifically, updating aspects of the operating system or installing any software that changes parameters of the computer
environment could interfere with proper operation of the instrument software.

CAUTION:

Running virus-checking software, screen-savers, maintenance software, network-security software, and possibly

other software on the SECTOR Imager computer could cause conflicts with the operation of the instrument software.

CAUTION:

Use of other applications while plates are being read may interfere with system performance. Use of operating

system power features that disable USB communication, such as Hibernate, will cause the system to stop responding; a power
off/on cycle of the instrument and PC is required to restore function.

MSD

Instrument Service

should be consulted prior to moving the instrument.

«
...
27
28
29
30
31
...
»

Summary of Contents for SECTOR Image 2400

























































Reviews:

No comments

Related manuals for SECTOR Image 2400

Brand: e-tarti Pages: 15

Brand: A&D Pages: 104

Brand: Tanita Pages: 11

Brand: Tanita Pages: 15

Brand: Yamato Pages: 26

Brand: U-Line Pages: 12

Brand: Microlife Pages: 32

Brand: Sencor Pages: 10

ASPIRE LSS390680

Brand: aidacare Pages: 8

Brand: Rice Lake Pages: 6

Brand: RADWAG Pages: 67

Brand: CDN Pages: 4

Brand: Black & Decker Pages: 12

Brand: A&D Pages: 172

Brand: Philips Pages: 9

Brand: Philips Pages: 95

Brand: Xavax Pages: 14

Brand: Giropes Pages: 52

Brands by name

0 1 2 3 4 5 6 7 8 9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z

Popular brands

Load more brands