10
Safety Regulations
ALTAIR io360
US
Observe Proper Time for Display Stabilizing
Allow sufficient time for detector to display accurate reading. Response times vary based on the type of
sensor being utilized.
Observe Proper Battery Maintenance
WARNING!
Follow all instructions related to use and handling of batteries. Improper use and handling can result in
battery leakage, battery venting, explosion or fire.
• Use only batteries with MSA Part number 10201430 (Tadiran model number TL-5920 and Tadiran model
SL-2770)
• Do not mix batteries of different charge levels.
• When replacing batteries of a detector, do not mix old and new batteries.
• Replace all batteries of a detector when needed.
• Do not mix battery lots - check battery label for lot information.
• If not using all new batteries, only use the battery set that was previously partially discharged in the same
instrument.
• Battery replacement is to be performed only by a person that is trained to service and repair the product.
Failure to follow these warnings can result in serious personal injury or death.
WARNING!
DO NOT OPEN THE DETECTOR OR HUB WHEN AN EXPLOSIVE ATMOSPHERE IS PRESENT.
Failure to follow this warning can result in serious personal injury or death.
The battery shall not be replaced in a hazardous area. Only use Tadiran model number TL-5920 and Tadiran
model SL-2770, MSA Part Number 10201430.
Observe the following when using and handling the batteries:
• Do not insert batteries in reverse. Observe the + and - markings on the battery and on the device.
• Do not short circuit the batteries.
• Do not charge the batteries.
• Do not force discharge the batteries.
• Do not leave discharged batteries in the device.
• Do not overheat the batteries.
• Do not open the batteries.
• Do not deform the batteries.
• Do not expose the batteries to water.
• Do not encapsulate and/or modify the batteries.
• Store batteries in their original packaging away from metal objects. If already unpacked, do not mix or
jumble batteries.
