44
Operation
ALTAIR io360
US
6.6
Data
During detector operation the typical data is recorded for analysis and review, which includes:
• Alarm set points
• Alarms event, acknowledge, and clear
• Evacuation event, acknowledge, and clear
• Battery warning and battery warning acknowledge
• Battery alarm and battery alarm acknowledge
• Battery shutdown
• RFID read events
• Time synchronize events
• Enter and leave configuration mode
• Enter and leave calibration mode
• Calibration information
• Faults
• BLE connection change
• Combustible sensor activated
• Network connection changes
• Sensor locked alarms
• Time and date of events
6.6.1 Data Log
Detectors store gas reading data internally. Default data log settings record is 60 days of data at 30 minute
data reading intervals.
To retrieve data:
(1) Press the detector button to enter interactive mode.
(2) Connect to app.
a) Follow app prompts to retrieve data.
If using Grid, data is stored directly to Grid account.
If free account is set up, the user submits email address to Grid, a report of data will be sent via
email.
If no account is set up, the user can download data in CSV format.
6.7
HUB
The HUB is operated with an external supply voltage of 24 V DC.
The HUB must only be operated in the ambient temperature range and at the relative humidity (non-
condensing) specified.
A sudden power failure can cause a loss of data of the last minutes if operating data is saved periodically.
The HUB must only be operated with a distance of at least 20 cm to the user's body.
The HUB must only be used with approved antennas.
