71
Maintenance and Service
ALTAIR io360
US
8.15 Storage
Follow decommission instruction. When not in use, store the detector in a safe, dry place between 18 °C
(64 °F) and 30 °C (86 °F). After storage the detector must pass calibration before use.
8.16 HUB
Repairs and maintenance must be carried out only by MSA. Consider to update the device firmware
regularly. Be aware of the Procedures for Handling Electrostatically Sensitive Electronic.
WARNING!
Alterations of the HUB beyond the procedures described in the Setup, Deployment, Operation, and
Decomissioning sections of this manual or by anyone other than a person authorized by MSA, could cause
the unit to fail to perform properly.
Repair of the HUB must be performed by a person authorized by MSA.
Failure to follow this warning can result in serious personal injury or death.
8.16.1 Cleaning the HUB
Do not rub the device and never clean plastic surfaces with a dry cloth. Otherwise, electrostatic charges can
occur and damage the device. Always use a damp cloth instead.
Avoid alcoholic and chemical detergents. Otherwise, the device may be damaged and the labels may be
unreadable.
The HUB contains electrostatically sensitive components. Do not open the HUB without
using appropriate electrostatic discharge (ESD) protection. The warranty does not cover
damage caused by electrostatic discharges.
