Motorola ST7500 Feature User Manual Download

Page: 85 / 138

Highlight the required template and press

Menu

Select one of the following options:

If…

Then…

If you want to view the template,

select

View

If you want to delete the template,

select

Delete

If you want to edit the template,

perform the following actions:

Select

Edit Text

Edit the text.

Depending on the requirement, press the

Menu

key and do one of the following:

• To save the edited template, select

Save Changes

• To save the edited template as a new

template, select

Store

If you want to edit the name of the tem-
plate,

perform the following actions:

Select

Edit Name

Edit the template name and press

4.4.6

Predefined Templates

Predefined message templates are programmed into your radio.

You are allowed to perform limited edit operations on the predefined template. You can send it, but you
cannot store the edited template or erase it from the predefined template list.

4.4.6.1

Viewing Predefined Templates

Procedure:

From the home screen, press the

Menu

key.

From the home screen, press the

Menu/OK

key.

Select

Messages

→

Predefined

Highlight the required template and press

Menu

key.

Select

View

Select the required template.

4.4.6.2

Sending Predefined Templates

Procedure:

From the home screen, press the

Menu

key.

From the home screen, press the

Menu/OK

key.

Select

Messages

→

Predefined

MN004519A01-AK

Chapter 4: Main Menu

Summary of Contents for ST7500










































































































































Search results

Summary of Contents for ST7500

Reviews:

Related manuals for ST7500

Brands by name

Popular brands

Motorola ST7500, Feature User Manual

Search results

Summary of Contents for ST7500

Reviews:

Related manuals for ST7500

Brands by name

Popular brands