Motorola ST7500 Feature User Manual Download

Page: 81 / 138

Do one of the following to initiate the call:

• Press the

PTT

button.

• Press the

Send

key.

Press the

PTT

button to initiate the call.

4.4.2.6

Making Group Calls on the Talkgroup of the Message Sender

The Embedded Number feature is enabled by your service provider.

Procedure:

From the home screen, press the

Menu

key.

From the home screen, press the

Menu/OK

key.

Select

Messages

→

Inbox

Select the required message and press the

PTT

button.

4.4.3

Outbox

The outbox stores up to 100 sent messages that are arranged chronologically.

Table 24: Outbox Icons

Icon

Description

Delivery in Progress

Delivery Accomplished

Delivery Failed

Successful Outgoing Message

Failed Outgoing Message

Protected Message Delivery in Progress

Protected Message Delivery Accomplished

Protected Message Delivery Failed

Successful Outgoing Protected Message

MN004519A01-AK

Chapter 4: Main Menu

Summary of Contents for ST7500










































































































































Search results

Summary of Contents for ST7500

Reviews:

Related manuals for ST7500

Brands by name

Popular brands

Motorola ST7500, Feature User Manual

Search results

Summary of Contents for ST7500

Reviews:

Related manuals for ST7500

Brands by name

Popular brands