Motorola ST7500 Feature User Manual Download

Page: 28 / 138

Close the microSD card slot cover.

Install the battery.

NOTICE:

Due to a delicate construction of the microSD card slot, do not insert or remove

the microSD card unnecessarily, as it may damage the mechanism of the reader. For
copying files from the radio, use the USB Mass Storage Mode.

2.2.5.2

Removing the Micro CRYPTR Card

Procedure:

Remove the battery.

Flip open the metal cover door of the radio.

Slide to unlock the microSD card holder as indicated by the marking engraved on the microSD
card holder.

Flip open the microSD card holder door.

Remove the micro CRYPTR card from the microSD card holder

Close the microSD card holder and slide it to lock.

Close the metal cover door.

IMPORTANT:

Please ensure that the latches on the metal cover door is locked in place

before placing the battery into the radio.

Install the battery.

2.2.6

Installing the Battery

Procedure:

Insert battery into the compartment as illustrated until the contacts align and the battery hooks in
place.

MN004519A01-AK
Chapter 2: Getting Started

Summary of Contents for ST7500










































































































































Search results

Summary of Contents for ST7500

Reviews:

Related manuals for ST7500

Brands by name

Popular brands

Motorola ST7500, Feature User Manual

Search results

Summary of Contents for ST7500

Reviews:

Related manuals for ST7500

Brands by name

Popular brands