Motorola ST7500 Feature User Manual Download

Page: 52 / 138

Feature

Description

Send Status Message

Sends a dedicated status message to a dedicated address.

Sending Targeted Status

Sends a status message to a specific address.

Send User-Defined Tem-
plate (UDT)

Sends a user-defined message to a dedicated address.

Speaker Enable or Disable
per Call

Enables or disables the loudspeaker for a duration of the ongoing
call.

Switch to Previously Se-
lected Talkgroup

Changes the talkgroup of the radio to the previously selected talk-
group (DMO or TMO).

SIM Card End-to-End En-
cryption

Enables or disables End-to-End Encryption on the SIM card.

Timed Talkgroup Change

Makes a predefined talkgroup the selected talkgroup for a specified
amount of time. While you are using the predefined talkgroup, the
second press of the One-Touch Button results in:

• the radio returning to the original talkgroup.

• the radio restarting the timer before returning to the previously se-

lected talkgroup.

• no action on the radio, depending on the configuration.

After the timer expires, the radio returns to the previously selected
talkgroup.

TMO ↔ DMO Switch

Toggles between TMO and DMO modes.

TMO Talkgroup Scan

Turns the Talkgroup Scan feature in TMO Mode on or off.

Toggle Backlight

Toggles the backlight on or off.

Toggle Backlight Intensity

Regulates the backlight intensity.

Toggle Bluetooth Discov-
erable Mode

Turns Discoverable Mode on or off.

Toggle Bluetooth GATT
Sensor MMI Alerts

Toggles Bluetooth GATT Sensor MMI Alerts on or off.

Toggle BSI Encryption En-
abled or Disabled

Enables or disables BSI encryption.

Toggle Call Forwarding

Toggles Call Forwarding on or off.

Toggle Car Kit Speaker
Permanent On or Off

Permanently turns the Car Kit speaker on or off.

Toggle DMO or TMO

Toggles between TMO and DMO modes.

Toggle Extra Zoom

Turns Extra Zoom on or off.

Toggle Hi or Low Audio

Toggles audio between the external earpiece and the main speaker.
Hi or Low Audio is the default function for the lower

Side

button.

NOTICE:

This feature is supported in emergency Full Du-

plex Private Calls (FDPC) mode. Press the One-Touch
Button to toggle high or low audio state during incoming or
outgoing emergency FDPC.

MN004519A01-AK
Chapter 2: Getting Started

Summary of Contents for ST7500










































































































































Search results

Summary of Contents for ST7500

Reviews:

Related manuals for ST7500

Brands by name

Popular brands

Motorola ST7500, Feature User Manual

Search results

Summary of Contents for ST7500

Reviews:

Related manuals for ST7500

Brands by name

Popular brands