4.12.5.2
Setting the Date Manually
When and where to use:
If the date cannot update automatically through the infrastructure.
Procedure:
1
From the home screen, press the
Menu
key.
2
From the home screen, press the
Menu/OK
key.
3
Select
Setup
→
Time & Date
→
Set
→
Set Date
.
4
Select
Setup
→
Time & Date
→
Set Date
.
5
Enter current date using Navigation keys or keypad.
6
Enter current date using Navigation keys.
To set the next value, press
Menu/OK
. To go back to the previous value, press
Back
.
7
Press
Done
.
4.12.5.3
Setting Time Offset
Procedure:
1
From the home screen, press the
Menu
key.
2
From the home screen, press the
Menu/OK
key.
3
Select
Setup
→
Time & Date
→
Set
→
Time Offset
.
4
Select
Setup
→
Time & Date
→
Set Offset
.
5
Enter time offset using Navigation keys.
NOTICE:
You can adjust the offset value, with 15 minute steps, up to 14 hours ahead or
behind.
To set the next value, press
Menu/OK
. To go back to the previous value, press
Back
.
NOTICE:
You can adjust the offset value, with 15 minute steps, up to 14 hours ahead or
behind.
6
Press
Done
.
4.12.5.4
Setting Automatic Updates for the Time and Date
Procedure:
1
From the home screen, press the
Menu
key.
2
From the home screen, press the
Menu/OK
key.
3
Select
Setup
→
Time & Date
→
System Update
.
4
Select one of the following options:
•
Off
– All the infrastructure information are ignored. The radio uses internal time and offset.
•
Time Only
– Time displayed is calculated from the offset programmed by your service
provider added or subtracted from the infrastructure time.
•
Time & Offset
– Time and offset are updated after receiving from the infrastructure.
MN004519A01-AK
Chapter 4: Main Menu
107
