Motorola ST7500 Feature User Manual Download

Page: 69 / 138

Chapter 4

Main Menu

This chapter contains information on items in the main menu.

You can enter the menu items during a call. If not programmed otherwise by your service provider the
radio exits the menu, when a new call starts.

IMPORTANT:

Some menu items are model-specific and may not be activated or available on

your radio. Ensure the Menu Configuration is enabled on the CPS to allow the menu settings to
be visible on the radio MMI.

4.1

Scrolling through the Menu

Procedure:

From the home screen, press the

Menu

key.

From the home screen, press the

Menu/OK

key.

Scroll to the required item by pressing Navigation keys. Press the Soft key assigned as

Select

Right

Navigation key to select.

If the menu item contains a further set of menu items, repeat

step 3

NOTICE:

You can use shortcuts to access frequently used items.

Scroll to the required item using Navigation keys. Press

Menu/OK

to select.

If the menu item contains a further set of menu items, repeat

step 4

. Use the

Back

key to return

to the previous menu.

4.2

Menu Icons

The following icons make it easy to identify the menu items at first glance.

Table 20: Menu Icons

Menu Icon

Description

Main Menu Items/Context Sensitive Menu

It is assigned to

Menu

when the main menu items/context-sensitive menu

are active.

Dialer

Allows you to dial a number to initiate a private, phone, or Private Automatic
Branch Exchange (PABX) call. The default icon shown is the private call
icon. This icon changes as you change the call type.

Messages

Send status messages.

Send text messages (free text or according to user defined or predefined
templates).

MN004519A01-AK

Main Menu

Summary of Contents for ST7500










































































































































Search results

Summary of Contents for ST7500

Reviews:

Related manuals for ST7500

Brands by name

Popular brands

Motorola ST7500, Feature User Manual

Search results

Summary of Contents for ST7500

Reviews:

Related manuals for ST7500

Brands by name

Popular brands