Motorola ST7500 Feature User Manual Download

Page: 44 / 138

Icon

Description

Test Call-Out Alert Accepted

Indicates that Test Call-Out alert has been accepted.

Call-Out Fallback Alert

Indicates Call-Out Fallback alert.

Call-Out Alert Arrived

Indicates a receipt of a new Call-Out message.

Call-Out Alert Unread

Indicates unread alert in the

CO Box

End-to-End Encryption (E2EE)

Solid, when E2EE is enabled:

• For the selected talkgroup,

• For the highlighted private number,

• For the manually entered private number,

• When transmitting voice in Group Calls,

• When transmitting voice in Simplex Private Calls.

Blinking, when E2EE is enabled:

• When receiving voice in Group Calls,

• When receiving voice in Simplex Private Calls,

• During encrypted Duplex Private Calls.

Encryption Off

Blinking – Indicates that the SIM Card End-to-End Encryption is disabled
in DMO and TMO Modes.

SIM End-to-End Encryption (E2EE)

Solid – Indicates that the SIM Card E2EE is enabled in TMO Mode.

SIM End-to-End Encryption (E2EE)

Solid – Indicates that the SIM Card E2EE is enabled in DMO Mode. Num-
bers

and

point to the type of DMO Encryption keys that has been se-

lected.

Non-Secured Call – Air Encryption Unavailable

Blinking – Indicates that Air Encryption is not available when the radio:

• Is in the Local Site Trunking Mode.

• Attempts to connect to a gateway.

Non-Secured Call – Air Encryption Unavailable

Blinking – Indicates that Air Encryption is not available in DMO Mode.
The icon appears after the

PTT

button is pressed.

2.9

Holding Your Radio

Your radio has two microphones: a top microphone for simplex dispatcher/private calls and a bottom
microphone for duplex telephone-like calls.

MN004519A01-AK
Chapter 2: Getting Started

Summary of Contents for ST7500










































































































































Search results

Summary of Contents for ST7500

Reviews:

Related manuals for ST7500

Brands by name

Popular brands

Motorola ST7500, Feature User Manual

Search results

Summary of Contents for ST7500

Reviews:

Related manuals for ST7500

Brands by name

Popular brands