Motorola ST7500 Feature User Manual Download

Page: 43 / 138

Icon

Description

Emergency

Radio is in Emergency Operation.

Man Down Active

Indicates that the Man Down feature is active.

Man Down Alert

Indicates that the Man Down feature is active. This icon has the following
states:

Blinking (Pre-Alert State)

Triggered to inform and check on your status to avoid false Man Down
trigger. To exit the pre-Alert state, change the conditions or press the

PTT

button.

Solid (Emergency State)

Your radio enters Alert mode once pre-alert state timed-out.

Man Down Failure

Indicates that the Man Down device failed.

Bluetooth Connected

Bluetooth is enabled and at least one device is connected.

Bluetooth Disconnected

This icon has the following states:

Solid

Bluetooth is enabled but no device is connected.

Blinking

Bluetooth is enabled and the radio is in Discoverable Mode or connection
with a remote device is being established.

Indoor Location Enabled

Indicates that Indoor Location operation is enabled.

Indoor Location Suspended

Indicates that Indoor Location operation is temporarily suspended.

New Message Has Arrived

Indicates that a new message has arrived.

Normal Call-Out Alert

Indicates Normal Call-Out alert.

Normal Call-Out Alert Accepted

Indicates that Normal Call-Out alert has been accepted.

Normal Call-Out Alert on Standby

Indicates that Normal Call-Out is on standby.

Stormplan Call-Out Alert

Indicates Stormplan Call-Out alert.

Stormplan Call-Out Alert Accepted

Indicates that Stormplan Call-Out alert has been accepted.

Test Call-Out Alert

Indicates Test Call-Out alert.

MN004519A01-AK

Chapter 2: Getting Started

Summary of Contents for ST7500










































































































































Search results

Summary of Contents for ST7500

Reviews:

Related manuals for ST7500

Brands by name

Popular brands

Motorola ST7500, Feature User Manual

Search results

Summary of Contents for ST7500

Reviews:

Related manuals for ST7500

Brands by name

Popular brands