Motorola ST7500 Feature User Manual Download

Page: 84 / 138

Select the required template.

Press the

Menu/OK

key, and select

Send

4.4.5

Templates

A template box stores user-defined message templates.

Each message in

Inbox

and

Outbox

can be stored as a template. The name of the template and the

text can be edited later.

4.4.5.1

Sending User-Defined Templates

Procedure:

From the home screen, press the

Menu

key.

From the home screen, press the

Menu/OK

key.

Select

Messages

→

Templates

Select the required template.

Press the

Menu/OK

key and select

Send

Press and hold the

Menu/OK

key and select a contact.

Send the message by pressing the

Menu/OK

key.

Highlight the required template name and press

Send

Perform one of the following actions:

If…

Then…

If you want to send the message to a
talkgroup,

select the required talkgroup from the

Talk-

Group List

If you want to send the message to an
address in your contact list,

perform the following actions:

Press

abc

Select the name of the recipient.

If you want to send the message to a
contact or talkgroup that is not config-
ured in the radio,

perform the following actions:

Enter the contact number.

Press

Send

4.4.5.2

Managing User-Defined Templates

Procedure:

From the home screen, press the

Menu

key.

From the home screen, press the

Menu/OK

key.

Select

Messages

→

Templates

Select the required template.

Press the

Menu/OK

button and select

Edit

MN004519A01-AK
Chapter 4: Main Menu

Summary of Contents for ST7500










































































































































Search results

Summary of Contents for ST7500

Reviews:

Related manuals for ST7500

Brands by name

Popular brands

Motorola ST7500, Feature User Manual

Search results

Summary of Contents for ST7500

Reviews:

Related manuals for ST7500

Brands by name

Popular brands