Motorola ST7500 Feature User Manual Download

Page: 134 / 138

Message

Message Description

Radio Disabled

Check with your service provider.

Unit is OK

Warn:

Self-test error. A minor fault has been detected. Your radio
is still fully operative. If this error recur, note the error code
and contact service.

Unit Not Attached

Your radio could not attach to the system. The talkgroup
may not be defined in the system. Please try another
group.

Warning SD card not format-
ted correctly

The microSD card installed in your radio is not formatted
correctly. To format it, contact your service provider.

Warning: Space for less
than 10 picture signatures
left!

Radio internal memory is running out of space and no
more than 10 Digital Fingerprints can be saved.

Not enough space to store
picture signature!

Radio internal memory is full and no Digital Fingerprint can
be saved.

MN004519A01-AK
Appendix C: Troubleshooting

134

Summary of Contents for ST7500










































































































































Search results

Summary of Contents for ST7500

Reviews:

Related manuals for ST7500

Brands by name

Popular brands

Motorola ST7500, Feature User Manual

Search results

Summary of Contents for ST7500

Reviews:

Related manuals for ST7500

Brands by name

Popular brands