manualshive.com logo in svg

Motorola Omnii, User Manual, Page: 339 / 350

Share
Download
Motorola Omnii User Manual Download Page 339

Omnii XT15ni Non-Incendive Safety Guidelines  H - 3

Omnii XT15ni (non-incendive) Important Safety & Regulatory Information

The Omnii XT15ni (non-incendive) Hand-Held Computer has been qualified by UL LLC to the requirements of 
the USA and Canada for use in Class I, Division 2-Groups A, B, C and D T6 environments.

The users of this product are cautioned to use accessories and peripherals approved by Motorola. The use of 
accessories other than those recommended, or changes to this product that are not approved by Motorola, 
may void the compliance of this product and may result in the loss of the user's authority to operate the equip-
ment.

WARNING

This mark indicates that the user should read all included documentation 
before use.

WARNING

Ce marquage indique que l'usager doit, avant l'utilisation, lire toute la doc-
umentation incluse.

WARNING

Explosion Hazard-Substitution of components may impair suitability for 
Class I, Division 2 locations.

WARNING

This unit has NO OPERATOR REPLACEABLE PARTS other than the battery 
pack. Disassembly/assembly of the Omnii XT15ni must be performed by 
trained Motorola service personnel at a Motorola service depot. No unau-
thorized substitution of parts is allowed for the Omnii XT15ni hand-held.

Use ONLY the Motorola Model ST3001-NI battery pack in the Omnii XT15ni. No substitutions 
are permitted without authorization from Motorola personnel.

DO NOT CHARGE OR CHANGE BATTERIES in an area that is known to be hazardous. 
Replace batteries in an area known to be non-hazardous.

EXPLOSION HAZARD. DO NOT REMOVE OR REPLACE LAMPS, FUSES OR PLUG-IN 
MODULES (AS APPLICABLE) UNLESS POWER HAS BEEN DISCONNECTED OR THE 
AREA IS KNOWN TO BE FREE OF IGNITIBLE CONCENTRATIONS OF FLAMMABLE 
GASES OR VAPORS.

EXPLOSION HAZARD. DO NOT DISCONNECT WHILE THE CIRCUIT IS LIVE UNLESS THE 
AREA IS KNOWN TO BE FREE OF IGNITIBLE CONCENTRATIONS.

WARNING

Exposure to some chemicals may degrade the sealing properties of mate-
rials used in the following devices: battery packs, housings, LCDs, 
touchscreens, keypads.

Replacement of modules, housings, keypads, LCDs or touchscreens, 
end-caps, pods or external connectors must only be performed at an 
authorized Motorola service centre.

Summary of Contents for Omnii































































































































































































































































































































































Reviews:

No comments