manualshive.com logo in svg

Motorola Omnii, User Manual, Page: 257 / 350

Share
Download
Motorola Omnii User Manual Download Page 257

Imagers Applet  B - 3

The Imagers Applet

The 

Imagers

 applet is used to create, modify, delete and activate imager settings. The principle uses of the 

applet are to decode barcodes and to capture images. A 

Demonstration Application

 is provided to demonstrate 

how the imager works. Refer to 

“Imager and Camera Demo” on page 3-31

 for details.

Required Applets

In order to configure imaging, the 

Manage Triggers

 applet must be present in the 

Settings>System

 tab along 

with the 

Imagers

 applet.

Presets 

There are two methods that can be used to configure an imager using the 

Imagers

 applet:

•

Use a predefined preset.

•

Create a custom preset based on a predefined preset.

A 

preset

 is a group of exposure and image correction settings. Each preset configures the imager for a specific 

purpose such as barcode decoding or image capture.

Presets also allow easier and faster configuration of the imager after power-on or resume from suspend.

The predefined presets are generic and satisfy most user requirements. A custom preset can be created for a 
specific user application, such as: include only specified barcodes, read only a specified number of barcodes 
or for reading unusual media.

Every preset belongs to a preset type. The following preset types are available:

•

Imaging for photo capture.

•

Imaging for barcode decoding.

•

Symbology selection.

At any time, only one preset of each type can be designated as the user-selected 

active

 preset.

Predefined Presets

Predefined presets are built into the imaging software and cannot be changed. The predefined presets allow 
you to use the imager to perform specified tasks without having to understand and set numerous variables. In 
almost all cases these predefined presets are sufficient.

Barcode Predefined Presets

These presets encompass the majority of the most popular barcodes and their subtypes. The 

barcode 

decoding symbology

 predefined presets define which barcodes can be decoded. The 

barcode decoding 

camera

 predefined presets determine how the barcode images are captured 

IMPORTANT

It is strongly recommended that a predefined preset is used whenever 
possible. Each predefined preset contains a coherent group of settings 
that are known to work together in the intended environment. In almost 
all situations, at least one of the predefined presets results in a satis-
factory outcome.

Summary of Contents for Omnii































































































































































































































































































































































Reviews:

No comments