manualshive.com logo in svg

Motorola Omnii, User Manual

Share
Download
Motorola Omnii User Manual Download Page 200

4 - 86  Omnii (Windows Embedded Hand-Held 6.5) User Guide

Tapping on the 

Export

 button displays an 

Export Settings

 screen. The default Name –

 Kiosk_Settings

 – can be 

changed by the administrator even after it has been saved.

The .xml file contains all of the Kiosk configured settings, including the Administrator Password. When the file 
is imported to a device, the new password is applied immediately.

•

Whether choosing to import or export files, the same file location options will be listed. Following the action, 
a message stating the success of the operation and the location of the file is displayed.

•

With the exception of the password, changes made to settings take effect only after a warm reset. If further 
changes to the configuration are made, they will overwrite the changes caused by the import operation. 
After importing a file, a dialog box appears requesting a reset now or later. 

Summary of Contents for Omnii































































































































































































































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands