Installation
9
Connecting.the.Base.Station.and.Mains.Adaptor
1 . Feed the small plugs for the mains power
adaptor and the telephone line through the small
hole in the middle of the base stand as shown .
2 . Insert the telephone line plug into the
corresponding socket on the base station .
3 . Connect the small mains power adaptor plug into
the corresponding socket on the base station .
4 . Attach the base stand to the main part of the
base, being careful that the cables exit cleanly
through the small hole in the base stand:
Insert the 2 small plastic tabs on the stand into
the 2 upper slots on the base as shown .
Holding the stand with one hand on each of the 2 clips, gently squeeze the clips inwards and
down into the lower slots on the base, as shown . The stand will click into place . Check that
the stand is secure before placing it on your chosen surface .
5 . Connect the mains power adaptor to the mains wall socket and switch the
power on .
6 . Connect the telephone line cord to the telephone socket .
The base station is now ready for use .
Note: The base station does not have a power switch .
Only use the mains adaptor supplied with your phone .
Package.Contents
Single Pack
Twin Pack
Triple Pack
Quad Pack
Base station
1
1
1
1
Handset
1
2
3
4
Mains Adaptor
1
2
3
4
Telephone Line Cord
1
1
1
1
Rechargeable Batteries
2
4
6
8
(type AAA rechargeable)
Charger Unit
0
1
2
3
User’s Guide
1
1
1
1
Please check the contents of the package carefully . If something is missing or has become
damaged in transit, you should NOT use the telephone . In such a case you should return the
product to the dealer with your sales receipt or contact the Motorola distributor directly . (For
details, please refer to the Warranty section .)
Note:.
Retain the packaging of your appliance to prevent it from being damaged should you ever
need to return it .
Setting.up.the.Base.Station.and.Charger.Unit
Place the base station and charger unit in an easily accessible location near to a mains
power socket . Make sure that the location is stable and flat and that the surface is
non-slip . Make sure that all cables can be routed so as to prevent people tripping over
them . Furthermore, avoid placing the base station and charger unit too close to other
electronic appliances such as microwaves, PCs or HiFis, for example .
Do not expose the base station and charger unit to direct sunlight or allow them to
become wet . They should not be set up in rooms which are subject to
condensation or corrosive steam or a high concentration of dust (e .g . cellars,
garages or conservatories) . The room temperature must be between 0°c and 35°c .
07_0022 ME4251UK User Guide1.ind9 9
29/1/07 15:45:55
