g
ni
s
U
e
ht
u
ne
M
42
Changing the Recall Time (Flash)
Recall is used to insert a line interruption when connected to certain switchboards, for transferring
calls to another extension number, and for some network services, such as Call Waiting. For the
normal Recall setting is 600ms and your ME4251K is pre-set to this.
Note: Only change the Recall setting if you are advised to do so by your switchboard provider.
1. Press the LSK ‘Menu’
2. Use the
and
keys until ‘Settings’ is displayed
3. Press the LSK ‘Select’.
4. Press the
and
keys to highlight ‘Base Setup’ and press the LSK ‘Select’
5. Use the
and
keys to highlight ‘Flash Time’ and press the LSK ‘Select’
6. Use the
and
keys to highlight the new setting and press the LSK ‘OK’. When the Flash
Time change is complete, the handset will display ‘OK’.
7. Press the
key to return to standby
07_0022 ME4251UK User Guide1.ind44 44
29/1/07 15:46:11
the
Singapore
When on an external call, press key to access a Call Waiting Line when you hear the call waiting
prompt signal. Press key again to toggle between the two calls.
Access a Call Waiting Line/Holding and transferring calls (PABX)
When on an external call (PABX line)
1. Press key to put the call on hold.
2. Dial the number of the extension.
3. Press key again if you would like to take back the call, or to transfer the call.
Note: If several handsets are registered on the base station and a call should be put on hold or transferred,
press the key instead of .
