background image

CHAPTER 7 BLUETOOTH

Introduction

Bluetooth-equipped devices can communicate without wires, using frequency-hopping spread spectrum 
(FHSS) radio frequency (RF) to transmit and receive data in the 2.4 GHz Industry Scientific and Medical (ISM) 
band (802.15.1). Bluetooth wireless technology is specifically designed for short-range (10 meters/32 feet) 
communication and low power consumption. 

MC67s with Bluetooth capabilities can exchange information (e.g., files, appointments, and tasks) with other 
Bluetooth enabled devices such as phones, printers, access points, and other mobile computers. To use the 
MC67 as a modem, create a dial-up modem connection between a computer and MC67.

The MC67 with Bluetooth technology uses either the StoneStreet Bluetooth stack or the Microsoft Bluetooth 
stack. To write an application that uses the StoneStreet One Bluetooth stack APIs, refer to the Enterprise 
Mobility Developer Kit (EMDK) Help.

Adaptive Frequency Hopping

Adaptive Frequency Hopping (AFH) is a method of avoiding fixed frequency interferers, and can be used with 

Bluetooth voice. All devices in the piconet (Bluetooth network) must be AFH-capable in order for AFH to work. 
There is no AFH when connecting and discovering devices. Avoid making Bluetooth connections and 
discoveries during critical 802.11b communications. AFH for Bluetooth consists of four main sections:

Channel Classification - A method of detecting an interference on a channel-by-channel basis, or 
pre-defined channel mask.

Link Management - Coordinates and distributes the AFH information to the rest of the Bluetooth network.

Hop Sequence Modification - Avoids interference by selectively reducing the number of hopping 
channels.

Channel Maintenance - A method for periodically re-evaluating the channels.

When AFH is enabled, the Bluetooth radio “hops around” (instead of through) the 802.11b high-rate channels. 

AFH coexistence allows Motorola mobile computers to operate in any infrastructure. 

Summary of Contents for MC67

































































































































































































































Reviews: