![background image](http://html1.mh-extra.com/html/eurotech/zypad-br2000/zypad-br2000_quick-start_2440384001.webp)
Zypad BR2000 Development System
Quick Start
110125-20012, preliminary
February-2012
What’s in the Development System?
The development system includes the following:
•
Zypad BR2000
•
CompactFlash card loaded with Windows
®
Embedded Standard (installed in unit)
•
CompactFlash card loaded with Wind River Linux
•
Lithium-Ion battery pack
•
Battery charger with AC power adapter
•
Zypad BR2000 AC power adapter
•
Starter cable set
•
Utility USB flash drive
•
Utiliboot USB flash drive
(Wind River Linux OS recovery)
•
Zypad BR2000 Documentation DVD
Preparing the Zypad BR2000
Follow these steps to prepare your Zypad BR2000 for use:
1. Connect the three starter cables to the Zypad BR2000.
2. Connect a VGA display to the SVGA socket located on
the cable connected to J2.
3. Connect a USB keyboard and USB mouse to any USB
host port located on the cable connected to J1 or J2.
4. Insert the battery pack into the unit or connect the
power adapter. When the power adapter is connected,
the System Power LED, located under the LED status
indicator access panel, lights to blue. When using the
battery pack without AC adapter, the LED will not be lit.
Booting the Zypad BR2000
•
Press and hold the Power On/Off Button for at least
two seconds but no longer than four seconds.
Release when the System Power LED changes to
green indicating the power is on.
•
After 10 to 30 seconds, the Eurotech logo appears on
the VGA display.
Operating System Details
Windows Embedded Standard (WES)
•
Complete these steps to enable Bluetooth
functionality:
1. Click Start→Control Panel→Hardware→Device
Manager.
2. View Devices by connection. If the Bluetooth
device is not shown enumerated in the device list,
go to step 3.
3. Disable then enable the second “
Generic USB
Hub
” under “
Intel SCH Family USB2 Enhanced
Host Controller – 8117
”.
•
To enable the GPS application, run
u-center.exe
located in the
c:\drivers\u-center\u-
center\contents\
directory.
Audio, Display, and USB
Power On/Off Button
LED Status Indicators
(under access panel)
Secure Erase Button
Configuration Control
and Maintenance Display
Programmable Buttons
GPS Antenna
Integrated Wi-Fi and
Bluetooth Antennas
CompactFlash Slot
(behind removable panel)
USB, Serial, Power Input,
and Remote On/Off
Ethernet, Serial,
and Power Output