Motorola MC67 User Manual Download Page 40

Page: 40 / 224

2 - 8

MC67 User Guide

Tap the Status Bar to display an icon bar. Tap an icon to get additional notification or status information.

Connectivity

Connection is active.

Connection is not active.

Synchronization is occurring.

wireless fidelity (Wi-Fi) available.

Wi-Fi in use.

HSPA+ available.

3G available.

GPRS available.

EGPRS available.

Roaming.

WAN

Call missed.

Dialing while no SIM card is installed.

Call in progress.

Calls are forwarded.

Call on hold.

Speakerphone is on.

Phone on/good signal.

Phone off.

No WAN service.

Searching for WAN service.

Evolved High-Speed Packet Access (HSPA+)
connecting.

HSPA+ in use.

3G in use.

3G connecting.

General Packet Radio Service (GPRS) in use.

GPRS connecting.

Enhanced General Packet Radio Service

(EGPRS) in use.

EGPRS connecting.

Subscriber identification module (SIM) Card
not installed.

Audio

All sounds are on.

All sounds are off.

Vibrate is on.

Battery

Battery is charging.

Battery has a full charge.

Battery has a high charge.

Battery has a medium charge.

Battery has a low charge.

Battery has a very low charge.

Table 2-3

Status Bar Icons (Continued)

Icon

Description

Icon

Description

Summary of Contents for MC67

































































































































































































































Search results

Summary of Contents for MC67

Reviews:

Related manuals for MC67

Brands by name

Popular brands

Motorola MC67, User Manual

Search results

Summary of Contents for MC67

Reviews:

Related manuals for MC67

Brands by name

Popular brands