Motorola M68HC11EVB, User Manual

Page: 53 / 103

OPERATING INSTRUCTIONS
4-18 M68HC11EVB/D
EEMOD EEPROM Modify Mapping
4.6.7 EEPROM Modify Mapping
EEMOD [<address1>] [<address2>]
where:
None Display current starting and ending EEPROM address.
<address1> Specify new EEPROM starting address.
<address2> Specify new EEPROM ending address.
The EEMOD command is only used when the EVB resident MCU is changed from
XC68HC11A1FN device to an XC68HC11A2FN, XC68HC11E2FN, or XC68HC811E2FN
device. The EEMOD command informs the monitor where the EEPROM resident MCU is
mapped.
If the starting address is specified and the ending address is not specified, the re-mapped address
location will end at <address1> + 2K bytes.
EXAMPLES DESCRIPTION
>EEMOD<CR>
Displays current EEPROM starting and ending address
B600 B7FF
locations (XC68HC11A1 device).
>
>EEMOD E800<CR>
Specify remapped EEPROM starting address.
E800 EFFF
Starting address & ending address displayed.
>
Ending address automatically established via (<addr1> + 2K
bytes).
>EEMOD F800 FFFF<CR>
Specify remapped EEPROM starting and ending address
F800 FFFF
for an XC68HC811E2 device.
>