Motorola APX 6000 3 User Manual Download Page 6

Page: 6 / 146

6.12.2.10 Sent Text Messages.............................................................................. 80

6.12.2.11 Deleting a Text Message....................................................................... 81

6.12.2.12 Deleting All Text Messages....................................................................81

6.13 ASTRO 25 Advanced Messaging Solution.......................................................................... 81

6.13.1 Two-Factor Authentication..................................................................................... 81

6.13.1.1 Logging in using the Two-Factor Authentication...................................... 82

6.13.1.2 Logging out of Two-Factor Authentication............................................... 83

6.13.2 Sending a Query.................................................................................................... 83

6.13.3 Receiving a Query................................................................................................. 84

6.14 Secure Operations...............................................................................................................84

6.14.1 Selecting Secure Transmissions............................................................................85

6.14.2 Selecting Clear Transmissions ............................................................................. 85

6.14.3 Managing Encryption............................................................................................. 85

6.14.3.1 Loading Encryption Keys......................................................................... 85

6.14.3.2 Multikey Feature.......................................................................................86

6.14.3.3 Selecting Encryption Keys....................................................................... 86

6.14.3.4 Selecting Keysets.....................................................................................86

6.14.3.5 Erasing Encryption Keys.......................................................................... 87

6.14.3.6 Requesting an Over-the-Air Rekey.......................................................... 88

6.14.3.7 MDC OTAR (Conventional Only)............................................................. 88

6.14.3.8 Infinite UKEK Retention........................................................................... 88

6.14.3.9 Hear Clear................................................................................................89

6.15 Radio Inhibit.........................................................................................................................89

6.16 Global Positioning System/Global Navigation Satellite System...........................................89

6.16.1 GPS Performance Enhancement...........................................................................90

6.16.2 The Outdoor Location Feature (Using GPS)..........................................................90

6.16.3 Location Format..................................................................................................... 90

6.16.4 Military Grid Reference System (MGRS) Coordinates...........................................91

6.16.5 Accessing the Outdoor Location Feature...............................................................91

6.16.6 Selecting Location Format..................................................................................... 91

6.16.7 Saving a Waypoint................................................................................................. 92

6.16.8 Viewing a Saved Waypoint.................................................................................... 92

6.16.9 Deleting a Single Saved Waypoint.........................................................................93

6.16.10 Deleting All Saved Waypoints..............................................................................93

6.16.11 Measuring the Distance and Bearing from a Saved Waypoint............................ 93

6.16.12 Location Feature in Emergency Mode................................................................. 94

6.16.13 Peer-Location on the Display (ASTRO Conventional)......................................... 94

6.17 Mission Critical Geofence (ASTRO 25 Trunking)................................................................ 95

6.17.1 Entering the Geofence Area.................................................................................. 95

MN004476A01-AE
Contents

Summary of Contents for APX 6000 3


















































































































































Search results

Summary of Contents for APX 6000 3

Reviews:

Related manuals for APX 6000 3

Brands by name

Popular brands

Motorola APX 6000 3, User Manual

Search results

Summary of Contents for APX 6000 3

Reviews:

Related manuals for APX 6000 3

Brands by name

Popular brands