Motorola APX 6000 3 User Manual Download Page 85

Page: 85 / 146

6.14.1

Selecting Secure Transmissions

Procedure:

Turn the preprogrammed

Secure/Clear

switch to the secure position.

• If the selected channel is preprogrammed for clear-only operation, when you press the

PTT

button, you hear an invalid mode tone and the display shows

Clear TX only

• The radio does not transmit until you set the

Secure/Clear

switch to the clear position.

• If the “Ignore

Secure/Clear

Switch when Strapped” programming option is enabled, the radio

transmits without displaying any messages in the strapped mode of operation, regardless of
the

Secure/Clear

switch setting. This option must be preprogrammed by a qualified radio

technician.

• The

Secure/Clear

switch only applies when the radio is transmitting.

6.14.2

Selecting Clear Transmissions

Procedure:

Turn the preprogrammed

Secure/Clear

switch to the clear position.

• If the selected channel is preprogrammed for secure-only operation, when you press the

PTT

button, you hear an invalid mode tone and the display shows

Secure TX only

• The radio does not transmit until you set the

Secure/ Clear

switch to the secure position.

• You can request to configure the radio to ignore the clear voice or insecured transmission

when the radio is in secured transmission. Check with your agent for details.

• If the “Ignore

Secure/Clear

Switch when Strapped” programming option is enabled, the radio

transmits without displaying any messages in the strapped mode of operation, regardless of
the

Secure/Clear

switch setting. This option must be preprogrammed by a qualified radio

technician.

• The

Secure/Clear

switch only applies when the radio is transmitting.

6.14.3

Managing Encryption

This chapter explains the encryption feature on your radio.

6.14.3.1

Loading Encryption Keys

Prerequisites:

• Refer to the

Key Variable Loader (KVL) manual

for equipment connections and setup.

Procedure:

Attach the KVL to your radio.

The display shows

Keyloading

and all other radio functions, except for power down, backlight,

and volume, are locked out.

MN004476A01-AE

Chapter 6: Advanced Features

Summary of Contents for APX 6000 3


















































































































































Search results

Summary of Contents for APX 6000 3

Reviews:

Related manuals for APX 6000 3

Brands by name

Popular brands

Motorola APX 6000 3, User Manual

Search results

Summary of Contents for APX 6000 3

Reviews:

Related manuals for APX 6000 3

Brands by name

Popular brands