Backlight and
Bar Color
Notification
When
The radio is out of range.
The radio enters Failsoft mode.
The radio is unable to establish a full connection with
the system.
The radio is unable to authenticate or register with the
system.
The radio detects mismatch between the radio and the
battery.
Green
Call Alerts
The radio receives a private call.
The radio receives a phone call.
The radio receives a call alert.
The radio receives a selective call.
The radio enters Geofence.
4.7
Alert Tones
Your radio uses alert tones to inform you of the condition of your radio. The following table lists these
tones and when they occur.
You Hear
Tone Name
Heard
Short, Low-
Pitched
Tone
Radio Self Test Fail
When radio fails its power-up self test.
Reject
When an unauthorized request is made.
Time-Out Timer Warn-
ing
Four seconds before time out.
No ACK Received
When radio fails to receive an acknowledgment.
Individual Call Warn-
ing Tone
When radio is in an individual call for greater than six
seconds without any activity.
Man Down Entry
When radio initiates Man Down mode.
Long, Low-
Pitched
Tone
Time-Out Timer Timed
Out
After time out.
Talk Prohibit/PTT In-
hibit
(When
PTT
button is pressed) transmissions are not al-
lowed.
Lack of Voice PTT
Time out
When the radio ends your call after it detected there is
lack of voice for 60 seconds after the PTT is pressed
and hold. Your radio ends the call to enable your radio
to receive calls from other radio users. The duration of
this timer can be preprogrammed by a qualified radio
technician.
Out of Range
(When
PTT
button is pressed) the radio is out of range
of the system.
Invalid Mode
When radio is on an unpreprogrammed channel.
MN004476A01-AE
Chapter 4: Status Indicators
38
